Replace the drive if the error repeats. I don't really trust the drive because I already lost one file to it, and the drive seems unwilling to set the problem sectors aside. Retest the drive. Track 0 also holds information about the drive. useful reference
This may be due to a defect with the drive or a bad connection. Replace Drive 207 SMART status failed before the media scan. Drive should be replaced. Forum ST3250318AS High Raw Read Error Rate Forum S m a r t raw read error rate Forum Raw Read Error and Multizone error rate is failing WD Lifeguard Forum WD
Last edited: Sep 1, 2015 spirit, Aug 31, 2015 #1 johnb35 Administrator Staff Member Messages: 37,581 223 Errors Repaired Errors found, but have been repaired successfully. Drive should be replaced. The drive is toast, right? #1 lakedude, Dec 5, 2012 Fardringle Diamond Member Joined: Oct 23, 2000 Messages: 8,007 Likes Received: 6 Western Digital's Diagnostic Error Codes list says that
An interrupt command to perform a specific task failed to complete. Please rate the helpfulness of this answer Answers others found helpful Understanding S.M.A.R.T. Only 1 reallocated sector, just the ECC needs to fix the raw medium errors, which is normal given the data density. Retest.
The information file, which holds the data pertaining to this drive, is corrupted or missing. Western Digital Error Code 0007 Replace the drive. Replace the drive if the error repeats. https://hardforum.com/threads/wd-diagnostics-error-code-223.1300005/ It "wraps" after 49.710 days.
Re-test Drive with appropriate diagnostic utility 202 Drive Not Supported Older Western Digital drives are not supported by the diagnostic utility version being used. Replace Drive 358 DAM 10+ Data Address Mark. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always Re-test Drive 162 READY EXPECTED Timeout from checking busy bit.
Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility. Retest after checking the connections. Western Digital Error Codes It may also be due to a defective connection. Retest after checking the connections.
There are too many errors detected on this drive to be repaired. see here Check your floppy and retest. Retest the drive. Re-Test Drive 20 Failed to Delete Partitions A Device I/O Control command during the test has failed.
SolvedRaw Read Errors on brand new Seagate 2TB Internal drive. Similar Threads - DLGDIAG error code Forum Date Getting secure connetion fail error messages Computer Help Oct 21, 2016 Hard Drive Problems on New PC Computer Help Sep 11, 2016 hard Re-Test Drive 109 DRQ WAS SET The drive did not properly respond to test commands. this page Retest.
Its not a good thing though. I kinda figured... This may be a drive issue, however it may be related to a defective connection.
Several instances of information on data positioning and location could not be found. My only concern is how to RMA this when I fill out the RMA.What would I put? Dlgdiag keeps returning with error code 0223 no matter how many times its run Drive should be replaced. Problems associated with booking flights inside another set of flights?
Replace the drive if the error repeats. This may be due to a media or read/write error. Further errors indicate a defective drive. Get More Info Why cast an A-lister for Groot?
Re-Test Drive 103 Write Fault Error A Write command during the test has failed to complete. Re-Test Drive 12 Too Many Bad Sectors Detected Error count reached a threshold value. Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed. It also may be due to a defective connection.
It also may be due to a defective connection. ECC is a hardware correction technique that corrects errors. Drive should be replaced. Replace the drive if the error repeats.
You may need to rescan to ensure that the repairs were effective. It may also happen when the wrong version of diagnostic utility is used. This may be due to a media or read error. That is how I've been running dlgdiag to date.
Return to Top Data Lifeguard Tools 5.22 for DOS Error Codes Note: If the same error code is encountered more than once after re-testing, please Contact Us for additional assistance. Retest after checking the connections. The drive is defective. Replace the drive if the error repeats.
A number of ECC errors (between 2 through 9) have been detected.